Pages

Ads 468x60px

Wednesday, 24 July 2013

Solution for idea e1732 and e1550 signal problem (after unlocking)

Hi friends most of us used cdma work shop to unlock idea e1732, e1550,
In this process every modem gets unlocked but the problem is some of the modems not able to catch the signal. Some of them only detect BSNL.   I have faced the same problem finally I found  the solution for this.


Download following first:(if u have already no need to down load unlocker kit)
1. unlocker kit  (cdmawork shop,downgrader) .
Here is the procedure:

For advanced user:
1.connect your modem (which is unlocked but not detecting signal or not showing any network)
2.Then come on CDMA wokrshop and Select Com Port and click on Connect and navigate to Memory Tab >> NV ITEMS >> Click On Write
3.Now you can see one confirm box click on OK. then Click on Open then borwse and select the file select the  NV ITEMS file given below
     1.For e1732  select 1732 repair.txt
     2.For e1550  select 1550repair.txt
4.wait till it reaches 100% .
5. Now done . put any sim and check
Needed files:
For beginners:
Step by Step guide to unlocking huawei e1732 idea netsetter Proper

1. Download CDMA workshop v 2.7.0. & open ( Disable antivirus )

2. Download Huawei e1732 down grader.

3. Insert an Unwanted Sim to your huawei e1732 netsetter.

4. Find the Proper port your huawei e1732 modem is connected.

You Can Do These Step

Right click on your My Computer> Manage > Device Manager >
Ports (COM & LPT)  > HUAWEI Mobile Connect – 3G Application Interface
( COM [The port number appear in your system] )

5. Note the com port number into which your huawei e1732
    idea netsetter modem is connected.
6. Run CDMA Workshop v2.7.0.exe ( check antivirus Disable)
7. Select the Port that you noted from your Device Manager  under
    the port option in COM Settings (AT mode) under the Main tab.
 
http://4.bp.blogspot.com/-mkvz4S2gRPU/TwAY5-kQs1I/AAAAAAAAAf4/0Alz_pRUYVU/s1600/1.png

8. Click on connect then again click on read.
http://2.bp.blogspot.com/-mu94o9EdQwQ/TwAZoB6a2DI/AAAAAAAAAgE/XI8_yF9joFE/s1600/2.png

9. Go to the Security tab > Type 000000 in the blank box
    under SPC > Click on SPC button > Click on Send with
    Default (nv_read) as SPC.
http://3.bp.blogspot.com/-0sTdUpGIeoE/TwAaeUHa1rI/AAAAAAAAAgQ/G4hkNuucwEQ/s1600/3.png


10. Click  Memory tab > NV Items > Read > Now a Conform box
      will appear > Click OK > Now NV Items Backup box will appear
      > In the box straight to Last NV Item type 9999 > Click OK >
      Save the file by giving a file name you like 
http://4.bp.blogspot.com/-q0fTU_QYxtE/TwAblALiVVI/AAAAAAAAAgc/t-Wzxxjsn44/s1600/4.png

11. When the buffer reach 100% your file is saved successfully.
      Now a Information box will appear > Click OK > Minimize
      CDMA Workshop v2.7.0

12. Run E1732 Down grader  accept the agreement > Next >
      wait for a few seconds until the search for your modem
      finishes > (Don’t mark Auto remove the device after update )
      Next > (Don’t unplug data card while process is not finish) >
      Start > At the end of Downloading Programs.. you will get a
      Update Failure! error dialog box (Don't Worry & Think Bad)
      > Click OK > Click Finish

13. Restore CDMA Workshop v2.7.0 > Main tab > Disconnect.

14. Unplug your  Net setter (Modem) from your computer.

15. Again Plug it to the Computer > Check the Port again from
      the Device Manager
16. Then come on CDMA wokrshop and Select Com Port and click on Connect and navigate to Memory Tab >> NV ITEMS >> Click On Write 
17.Now you can see one confirm box click on OK. then Click on Open then browse and select the file select the  NV ITEMS file given below
     1.For e1732  select 1732 repair.txt

     2.For e1550  select 1550repair.txt
18.wait till it reaches 100% .  
19. Now done . use any sim in netsetter.
Related Posts Plugin for WordPress, Blogger...