Pages

Ads 468x60px

Wednesday 24 July 2013

Solution for idea e1732 and e1550 signal problem (after unlocking)

Hi friends most of us used cdma work shop to unlock idea e1732, e1550,
In this process every modem gets unlocked but the problem is some of the modems not able to catch the signal. Some of them only detect BSNL.   I have faced the same problem finally I found  the solution for this.


Download following first:(if u have already no need to down load unlocker kit)
1. unlocker kit  (cdmawork shop,downgrader) .
Here is the procedure:

For advanced user:
1.connect your modem (which is unlocked but not detecting signal or not showing any network)
2.Then come on CDMA wokrshop and Select Com Port and click on Connect and navigate to Memory Tab >> NV ITEMS >> Click On Write
3.Now you can see one confirm box click on OK. then Click on Open then borwse and select the file select the  NV ITEMS file given below
     1.For e1732  select 1732 repair.txt
     2.For e1550  select 1550repair.txt
4.wait till it reaches 100% .
5. Now done . put any sim and check
Needed files:
For beginners:
Step by Step guide to unlocking huawei e1732 idea netsetter Proper

1. Download CDMA workshop v 2.7.0. & open ( Disable antivirus )

2. Download Huawei e1732 down grader.

3. Insert an Unwanted Sim to your huawei e1732 netsetter.

4. Find the Proper port your huawei e1732 modem is connected.

You Can Do These Step

Right click on your My Computer> Manage > Device Manager >
Ports (COM & LPT)  > HUAWEI Mobile Connect – 3G Application Interface
( COM [The port number appear in your system] )

5. Note the com port number into which your huawei e1732
    idea netsetter modem is connected.
6. Run CDMA Workshop v2.7.0.exe ( check antivirus Disable)
7. Select the Port that you noted from your Device Manager  under
    the port option in COM Settings (AT mode) under the Main tab.
 
http://4.bp.blogspot.com/-mkvz4S2gRPU/TwAY5-kQs1I/AAAAAAAAAf4/0Alz_pRUYVU/s1600/1.png

8. Click on connect then again click on read.
http://2.bp.blogspot.com/-mu94o9EdQwQ/TwAZoB6a2DI/AAAAAAAAAgE/XI8_yF9joFE/s1600/2.png

9. Go to the Security tab > Type 000000 in the blank box
    under SPC > Click on SPC button > Click on Send with
    Default (nv_read) as SPC.
http://3.bp.blogspot.com/-0sTdUpGIeoE/TwAaeUHa1rI/AAAAAAAAAgQ/G4hkNuucwEQ/s1600/3.png


10. Click  Memory tab > NV Items > Read > Now a Conform box
      will appear > Click OK > Now NV Items Backup box will appear
      > In the box straight to Last NV Item type 9999 > Click OK >
      Save the file by giving a file name you like 
http://4.bp.blogspot.com/-q0fTU_QYxtE/TwAblALiVVI/AAAAAAAAAgc/t-Wzxxjsn44/s1600/4.png

11. When the buffer reach 100% your file is saved successfully.
      Now a Information box will appear > Click OK > Minimize
      CDMA Workshop v2.7.0

12. Run E1732 Down grader  accept the agreement > Next >
      wait for a few seconds until the search for your modem
      finishes > (Don’t mark Auto remove the device after update )
      Next > (Don’t unplug data card while process is not finish) >
      Start > At the end of Downloading Programs.. you will get a
      Update Failure! error dialog box (Don't Worry & Think Bad)
      > Click OK > Click Finish

13. Restore CDMA Workshop v2.7.0 > Main tab > Disconnect.

14. Unplug your  Net setter (Modem) from your computer.

15. Again Plug it to the Computer > Check the Port again from
      the Device Manager
16. Then come on CDMA wokrshop and Select Com Port and click on Connect and navigate to Memory Tab >> NV ITEMS >> Click On Write 
17.Now you can see one confirm box click on OK. then Click on Open then browse and select the file select the  NV ITEMS file given below
     1.For e1732  select 1732 repair.txt

     2.For e1550  select 1550repair.txt
18.wait till it reaches 100% .  
19. Now done . use any sim in netsetter.

Unlocking Idea Netsetter E1732

Follow the steps:
1] Download this file [Download]

2] Disable your antivirus and Remove Idea card from modem and insert another company SIM card.
 i.e. BSNL,AIRCEL,DOCOMO,AIRTEL etc.
3] Find out modem port no.
                Device Manager->Ports (COM&LPT)
HUAWEI Mobile Connect – 3G Application Interface (COM[X]) ...X is port no.

Find Port Number (Here COM9)

4] Extract downloaded Modem Unlock Tools.zip

5] Run ‘CDMA Workshop.exe’
  In Main tab
  • Set your port no under COM Setting.
  • Click on ‘Connect’
6] Click on Security Tab
  • Under SPC, enter ‘000000’ in empty box.
  • Click on SPC and then Send
7] Click on Memory Tab
  • Under ‘NV Items’  click on Read
  •  Click on Ok when confirmation box appears


  • Now enter ‘9999’ in Last NV Item box
  • Click Ok
  • Save File as ‘Unlock ‘ on desktop, and wait till the progress bar reaches to 100%



8] Now open ‘E1732 Downgrader.exe’ file and minimize ‘CDMA Workshop’
  • Click on Next
  • ‘Update Failure’ message will appear don’t worry about this
  • Click on Finish.


Just Click on Ok


9] Now move to 'CDMA Workshop' window
  • Under Main Tab click on Disconnect. 
  • Unplug your modem
  • Again Plugin modem
  •  Again find Port no.
10] In Main Tab under COM setting
  • Set port no
  • Click on Connect

11] Go to Memory tab
  • Under NV Items, Click on Write
  • Click on Ok when confirmation box appears
  • Choose ‘Unlock’ file from desktop that previously saved.
  • Click on Ok and wait till progress bar reaches to 100%.
  •  Click on Ok

12] Go to the Main Tab and click on Disconnect.

13] Close ‘CDMA Workshop’ when confirmation dialog box appears Click on ‘No’
Now, you can use any SIM card in your modem !!


BSNL Internet Connection after Unlocking.

How to Unlock Idea 3G Netsetter

STEP BY STEP GUIDE TO UNLOCK IDEA 3G NETSETTE


1) Download the cdma workshop and download huawei e1732 downgrader ( disable antivirus before opening the cdma workshop ).

cdma workshop free download
huawei e1732 downgrader free download

2) Insert a non idea sim to your Idea 3G Netsetter (e1732 ).

3) Find the common port to which your Idea 3G Netsetter (e1732 ) modem is connected.
Right click on your My Computer icon > Properties > Device Manager > Ports (COM & LPT) > HUAWEI Mobile Connect – 3G Application Interface (COM [The port number appear in your system] )

4) Run CDMA Workshop v2.7.0.exe

5) Select the Port that you noted from your Device Manager under the Port option in COM Settings (AT mode) under the Main tab.

6) Then click on connect and then click on read



7) Go to the Security tab > Type 000000 in the blank box under SPC > Click on SPC button > Click on Send with Default (nv_read) as SPC.



8) Click on Memory tab > NV Items > Read > Now a Conform box will appear > Click OK > Now a NV Items Backup box will appear > In the box straight to Last NV Item type 9999 > Click OK > Save the file by giving a file name you like (Eg: E1732Unlock)



9) When the buffer reach 100% your file is saved successfully. Now a Information box will appear > Click OK > Minimise CDMA Workshop v2.7.0

10) Run E1732 Downgrader8 > accept the agreement > Next > Wait for a few seconds until the search for your modem finishes > (Don’t mark on Auto remove the device after update) Next > (Don’t remove your data card until the process is finished) > Start > At the end of Downloading Programs… you will get a Update Failure! error dialog box (DON’T WORRY & DON’T GET DISAPPOINTED) > Click OK > Click Finish*

11) Restore CDMA Workshop v2.7.0 > Main tab > Disconnect

12) Unplug your Idea 3G Netsetter (e1732 ) modem from your computer.

13) Again Plug it to the Computer. Check the Port again from the Device Manager

14) Go to CDMA Workshop v2.7.08 select the Port that you noted from your Device Manager under the Port option in COM Settings (AT mode) under the Main tab as we did before > Click on Connect > Memory tab > NV Items > Click on Write > A Confirm box will appear > Click OK > Open dialog box will appear > Open the file that you saved before > When the buffer reach 100% a Information dialog box appears with a success message > Click OK > Main tab > Disconnect*

15) Now close CDMA Workshop v2.7.0 > A Confirm dialogue box will appear > Click NO

16) Close everything and Enable your Antivirus

17) That’s it. Your Idea 3G Netsetter (e1732 )is unlocked successfully.

18) Unplug Idea Netsetter (Modem) from your computer.

19) Put a SIM Card other than IDEA to the Netsetter and again Plug it to the Computer.

20) Wait for Idea Netsetter to Start. It will detect the SIM card and enjoy browsing with any other SIM.

To make new mobile apn settings you can download huawei mobile partner
Mobile Partner free download
Many people are having problem while connecting to internet with other sim cards now you can connect by any sim card with default IDEA net Setter Dashboard using these steps. If your Modem is detecting sim cards and you are getting errors then try this

Windows XP
Open Control Panel -> Phone and Modem (found directly in control panel or in Printers and other hardware ) –> modem tab –> huawei mobile connect 3g modem (which is present on COM ) –> properties advance –> extra initializing command use given commands below and click OK

Windows 7
In the start menu, type phone and modemclick on itb —> modems –> huawei mobile connect 3g modem –> properties –> change settings –> advance –> extra initialization command –> use given commands below and if it asks for Country and area code then set Country to India and Area Code to 91 and leave other fields blank.

commands/settings

Aircel : AT+CGDCONT=1,"IP",”aircelgprs”

Airtel : AT+CGDCONT=1,”IP”,”airtelgprs.com”

BSNLAT+CGDCONT=1,”IP”,”bsnlnet”

IdeaAT+CGDCONT=1,”IP”,”internet”

RelianceAT+CGDCONT=1,”IP”,”rcomnet”

Tata DocomoAT+CGDCONT=1,”IP”,”tata.docomo.internet”

VideoconAT+CGDCONT=1,”IP”,”vinternet.com”

VodafoneAT+CGDCONT=1,”IP”,”www”

If you have any trouble doing this please comment here

 

Unlocking IDEA 3G Net Setter Huawei E1732 (100% WORKING)


Idea netsetter 7.2 mbps  is most demanded usb dongle in my market which is too cheap(Approx 1400/- ),People are unlocking this modem for 75/- Rs or even more in some citiesBut finally i am here sharing a permanent unlock solution for E1732 and other two alternet method to unlock idea netsetter.I have already discussed how to unlock idea netsetter E1732 ? But many people are failed to do so beacause of their small mistakes,So here i am posting one more articles to solve all the query related to unlock of ideanetsetter.

Unlock huawei e1732 idea netsetter permanently

Step A:-

Before starting unlocking you need following two software.So download it first and Extract it.

    1) CDMA Workshop        Download
    2) E1732 Downgrader    Download
    3) Mobile Partner 23       Download    

Unlock Huawei  E1732 (Idea) 7.2 mbps usb 3G modem
Unlocking of Huawei E1732 can be done in 3 portion,Here we have to downgrade the firmware of the modem because the idea 7.2 mbps modem comes with customized Firmware.

Right click on you My Computer
 >Select Properties
 >Select Device Manager
Now device manager window appears,Select Ports(COM & LPT)
Refer following screenshot and select Huawei Mobile Connect – 3G Application interface
and Note down the Post No. (Here Any Port)




Step B:-

Step 1:- Now Run CDMA Workshop.Exe From  CDMA_Workshop and  Click on Main and select the com port number in COM Settings (AT mode) which you have note down in above step. After that click on Connect Select button.Don’t forget to check status !! It must shows ready if you have selected correct com port.



Step 2:- Now navigate to Memory tab and click on Read button. Instantly Confirm pop up box appears;Here Click On OK button as shown in below screenshot.


Step 3:-  After that on more box appears,Here Set Last NV item to 9999




Step 4:- After that Save as box appears, Here you have to save Nv Backup file to your desire place with any name in your pc Be Careful........?



Step 5:- Now CDMA workshop starts reading and this will take some time approximately two minutes,After that you will see the following message and click on OK.


Step C :-

Step 1:- Now Run The E1732Update_11.126.16.00.356_B427.exe from Huawei E1732 firmware     E1732Update_11.126.16.00.356_B427.rar , Select I accept the agreement and click on next button.



Step 2:- This wizard will search your modem in your few seconds !! Make sure you have closed mobile partner 23 or Idea internet dashboard,If one of these application is opened then Firmware not able find your modem and shows error



Step 3:-Read and Follow the instruction carefully and Click on Start button.

Step 4:- Click On Next button.

Step 5:- Now the Application starts downloading firmware to your modem




Step 6:- After completing above process,you will get massage like update failure,Don’t worry and click on OK  and Finish !! Now you are done,Second portion of the firmware downgrading is completed




This is the last portion of the unlocking here you have to write Nv backup file to modem,which you have stored previously at the starting of the unlocking in the first portion.


Step 7: Now Run CDMA workshop again.Confirm the port number again from device manager.





Step 8:- And select port no Click on Main and select the com port number in COM Settings   (AT mode) which you have note down in above step (Here COM 12 ). After that click on Connect Select button.Refer the following screenshot for better understanding



Step 9:- Now Quickly navigate to Memory tab and click on write button.After that Browse and open the Nv Backup file (Here e1732.txt)



Step 10:- As you click on write open button Cdma workshop instantly starts writing this file to your modem.this process will completed in few seconds !!



When the process will reach at 100% you can see success message then click on OK and Close the CDMA workshop,It will ask for “To send Reset Command” click on No

Disconnect your modem and Insert it again.you are Done !! Now your modem is Unlocked.After Unlocking your Huawei modem,Mobile partner is essential software that you need.Because in unlocked modem default dashboard not gives maximum flexibility.Install Mobile partner 23 and  enjoy Voice and USSD Features

Now CDMA workshop starts reading and this will take some time approximately two minutes,After that you will see the following message and click on OK.



Monday 22 July 2013

Repair Idea NetSetter E1550 IMEI lost problem


Idea Net Setter E1550 3.6Mbps DL Qualcomm MSM6246 based Mobile Broadband Device made by Huawei Technologies is a very popular between the users.
Idea NetSetter E1550 has come in market with different version of firmwares which are below :

1. Version : 11.608.14.00.356
2. Version : 11.608.14.01.356
3. Version : 11.608.14.15.356
4. Version : 11.609.20.02.356
5. Version : 11.609.20.03.356
Idea NetSetter E1550 has some different Dashboards also which are appended below : 

1. Version : UTPS11.030.01.01.356_MAC11.201.02.00.03

2. Version : UTPS16.001.06.01.356_MAC15.001.07.02.356_LNX15.001 .07.03.356

3. Version : UTPS21.005.11.00.356_MAC21.005.11.00.356_LNX21.005 .11.01.356


These all modems can be unlocked via downgrader. But, problem is that many users have lost their IMEI no because of bad firmware and they are not able to use any network provider SIM.


Users who have lost their IMEI no. during the down gradation process can Repair Idea NetSetter E1550 IMEI lost problem via firmware.

You can use any of the firmware which is listed below.

Note : Use at your own Risk. Password : NiRaV  (Case Sensitive)


Idea Huawei 3g E-1550 Net setter Bsnl/Docomo 619 Error Problem Solved


As we have written tutorial on unlocking idea 3g huawei e-1550 netsetter and we got many comments there that some users are facing problem in unlocking so we have included screen shots and new firmware to unlock idea netsetter and written in setp by step format in new article and also made new post to solve any kind of issue with idea netsetter problems here and  I got some comments there that bsnl and docomo sims are not working for some readers.
Many readers(one time i also got that error ) were facing 619 Error message for docomo and banl sims so today im going to write a tutorial on how to solve that kind of 619 error with firmware upgrading. before startimg the article let me tell one tinh if you have any problems related idea netsetter you can get its answer by just commenting solve any kind of issue with idea netsetter problems her.

 Requirements
#. Needed Software
  1. Huawei Firmware  For Idea Netsetter E-1550  (E155XUpdate_11.608.14.15.311.B418)  Get Huawei Firmware From Here
  2. Huawei Code Unlocker Get Huawei Code UnlockerFrom Here
#. Needed Hardware
  1. Idea Net setter With Default Idea Sim (Default Sim Mean Sim That You Got With Netsetter)
  2. Computer Having At least 256Mb Ram
 Step you have to follow
  • First Of All Collect All Software And Hardware
  • Then Note Down Your IMEI number some ware
  • Open Huawei Code Calculator And Calculate Your Unlock Code By Putting Your IMEI number in Blank IMEI number And Note Down Flash Code In Page (Flash Code Is Unlock Code) See Below Screen Shot For Help.
  • Then insert your Data Card
  • Now Go-to Huawei Firmware And Install It With The Help Of Following Screen ShotsFirst of all click on accept terms and then
    click on next

  • Then It Will Search For device Have A Look.
  • After Searching the netsetter it will ask to update Have A Look At Following Screens
Now you are done your netsetter is rady to use bsnl and docomo , any sim in it feel free to give your feedback
Have a Look on my netsetter


For Any Other Help Please Contact Me Via Comments

Idea Netsetter e1550 Permanent Unlock For Latest Firmware

Note: Your Computer Antivrus must be disabled

 Unlock Huawei !dea NetSetter E1550 Latest Firmware Version 11.609.20.03.356. 

Trick to unlock huawei idea netsetter e1550 latest firmware permanently

It was almost impossible to unlock huawei idea netsetter e1550 latest firmware version 11.609.20.03.356. but now it is possible and is very easy. its similiar to unlocking e 1732 by firmware downgrade. if you unlock your modem you can use any provider sim in your e 1550 latest firmware modem by following these simple steps. the trick was tested and found working and its absolutely free. so friends lets go and do it. first of all to unlock e1550 idea netsetter latest firmware version you need to download two softwares. there is another important point to note. you must disable your pc antivirus before downloading and running this softwares. cdma workshop file appears as a virus for many antivirus but it wont harm you in any way. so just disable antivirus, you can enable it after unlocking. so lets begin

step by step guide to unlock huawei e1550 latest firmware 11.609.20.03.356

  • Download cdma workshop from here. your antivirus must be disabled before downloading and running cdma workshop
  • You need to download one more software, e1550 downgrader software
  • Now insert any non idea sim into your e1550 latest firmware version modem. and plug in the modem to the pc.
  • Go to device manager and click on the modem in the list of devices and find the port number of your huawei e1550 idea netsetter.
  • Right click on your “My Computer” icon > Properties > Device Manager > Ports (COM & LPT)  > HUAWEI Mobile Connect – 3G Application Interface (COM[The port number appear in your system]).
  • Now double click and extract the cdma workshop (note: antivrus must be disabled).
  • Now select the com port in cdma workshop you just noted from device manager (if the connected com port is not in the list you will have to change the com port number from the device manager)


>> Now click on the connect button and the connect read.


>>   Now go to security tab Type “000000” in the blank box under “SPC” > Click on “SPC” button > Click on “Send” with Default (nv_read) as SPC.


>>  Click on “Memory” tab > NV Items > Read > Now a “Conform” box will appear > Click “OK” > Now a “NV Items Backup” box will appear > In the box straight to “Last NV Item” type “9999” > Click “OK” > Save the file by giving a file name you like (Eg: E1550Unlock etc.)



  • Now the buffer will start running and once the buffering is finished your file is saved automatically
  • Now a “Information” box will appear  Click “OK”
  • Minimise “CDMA Workshop v2.7.0”
  • Run “E1550 Downgrader”  you downloaded


  • I accept the agreement.
  • Next.
  • Wait for a few seconds until the search for your modem finishes

  • (Don’t mark on “Auto remove the device after update”) Next
  • (Don’t remove your data card until the process is finished)


  •  Start










  • At the end of “Downloading Programs…” you will get a “Update Failure!” error dialog box (DON’T WORRY & DON’T GET DISAPPOINTED)



  • Click “OK”
  •  Click “Finish
  • Restore the cdma workshop window. in cdma workshop go to “main” tab and click on disconnect
  • Unplug idea netsetter e1550 modem from pc
  • Now plug in the e1550 modem in again
  • Go to “CDMA Workshop v2.7.0” select the Port that you noted from your Device Manager under the Port option in “COM Settings (AT mode)” under the “Main” tab as we did before > Click on “Connect” > “Memory” tab > NV Items > Click on “Write” > A “Confirm” box will appear > Click “OK” > “Open” dialog box will appear > Open the file that you saved before > When the buffer reach “100%” a “Information” dialog box appears with a success message > Click “OK” > “Main” tab > Disconnect
  • Now close “CDMA Workshop v2.7.0” > A “Confirm” dialogue box will appear > Click “NO”
  • Close everything > Enable your Antivirus
Thats all. you have successfully unlocked your !dea netsetter e1550 modem with latest firmware version 11.609.20.03.356. now you can use any sim in to connect to internet. so friends enjoy the trick
once you have unlocked and want to use another provider you will need to change apn settings to connect to the new provider. but in some idea dashboads its impossible to change the apn settings. so in such cases you can download and install huawei mobile partner dashboard from here
So friends you are done. now if you have any trouble please comment here. and if you liked my post please share it with your friends and like us on facebook. thanks for reading
Related Posts Plugin for WordPress, Blogger...